MUB Jr. Tool
This unit consists of multiple carbide and steel components. Designed to connect to a 3/8” NPT pipe lance (customer furnished) with the tool at one end and the tungsten carbide reducer (supplied with # EE01098 model) at the other, the reducer threads into standard 1-1/4” NPSM nozzle holder. Aluminum oxide, silicon carbide or heavy steel shot not recommended.
Maximum abrasive mesh size = 30.
Air requirement = 80CFM @ 100PSI
| STOCK # | DESCRIPTION | CLEANS I.D. |
|---|---|---|
| EE01098 | MUB-HB Jr. Tool c/w centering collars kit and tungsten carbide reducer | 3/4" - 2" |
| EE01099 | MUB-Jr. w/Centering Collars, less reducer | |
| EE01100 | Deflector tip, tungsten carbide | |
| 291577 | Deflector tip, Roctec'500 | |
| EE01115 | Reducer only, tungsten carbide |
Circle Blast Jr. Tool
Tool consists of 4 components: main body, quad bore tungsten insert, carbide deflection tip and tip holding bolt. Mounts externally to 1-1/8" O.D. (1/2" I.D.), abrasive blast hose. Aluminum oxide not recommended.
Air requirement = 385CFM @ 100 PSI
| STOCK # | MODEL | DESCRIPTION | CLEANS I.D. |
|---|---|---|---|
| 291591 | MUB-CBJR | Tool, Complete, TC | 1-1/4" - 3" |
| 291562 | EE01078 | Deflector tip, tungsten carbide | |
| 291554 | EE20968 | Deflector tip, boron carbide | |
| 291568 | 1888900 | Deflector tip, Roctec'500 |
MUB 360 I.D. Blast Tool
1-1/4” NPSM thread, steel jacketed I.D. nozzle consisting only three parts: tungsten carbide lined body, large carbide tip and tip holding bolt. Aluminum oxide not recommended.
Air requirements = 225CFM @ 100PSI
| STOCK # | MODEL | DESCRIPTION | CLEANS I.D. |
|---|---|---|---|
| 291400 | MUB360 | I.D. tool complete | 2" - 5" |
| 291402 | MUB360DT | Deflector tip only, tungsten carbide | |
| 291404 | MUB360DB | Deflector tip only, boron carbide |
MUB Senior I.D. Blast Tool
This unit consists of multiple tungsten carbide, steel & rubber components and offers two optional centering devices based on job requirements. Aluminum oxide and silicon carbide are not recommended to use with this piece of equipment. #20 Mesh abrasive is the maximum abrasive size to be used with MUB-Sr.
Air requirement = 225CFM @ 100 PSI
| STOCK # | MODEL | DESCRIPTION | CLEANS I.D. |
|---|---|---|---|
| EE01076 | MUB-Sr | Tool only, complete | 2" - 3" |
| 291553 | MUB-SRCC | Tool c/w centering collars | 3" - 5" |
| 291555 | MUB-SRSC | Tool c/w scissor carriage | 5" - 12" |
| 291559 | SRCC | Centering collars, kit only | |
| 291556 | SRSC | Scissor carriage assy w/ sleeve and nut | |
| 291562 | Deflector tip, tungsten carbide | ||
| 291554 | Deflector tip, boron carbide | ||
| 291568 | Deflector tip, Roctec'500 |
Twister H.D. Pipe Blast Tool
This pneumatic air motor controlled tool provides infinite variability in rotation speed and instant braking. Each Twister is supplied with two (2) boron carbide nozzles (1/4”, 5/16”, or 3/8”), centering carriage kit with two (2) legs and wheel sets (short set for 12” – 20” and a long set for 20” – 36”), and wrench kit.
| STOCK # | DESCRIPTION | CLEANS I.D. |
|---|---|---|
| 221700 | Twister H.D. System complete | 12" - 36" |
| 221705 | Nozzle Head only | |
| 221707 | Hose Adapter | |
| 221710 | Internal Nylon liner | |
| 31074 | Nozzle, 1/4" Boron carbide | |
| 31075 | Nozzle, 5/16" Boron carbide | |
| 31076 | Nozzle, 3/8" Boron carbide |
